San Diego Industrial & Commercial Powder Coating
Built for Large Projects. Equipped for Production.
8,500 sq. ft. facility with a 20' × 10' × 10' industrial curing oven and matching sandblast booth. From oversized fabrications to production runs, Anocote Powder has the equipment and experience to handle demanding projects from start to finish.
20' × 10' × 10'
Curing Oven
20' × 10' × 10'
Sandblast Booth
8,500 sq. ft.
Facility
1,000+
Jobs Annually
12+
Years in Business
Trusted by Leading San Diego Organizations
Rady Children's Hospital
Qualcomm
General Atomics
Cutwater Spirits
San Diego Gulls
Snapdragon
Spectrum
Industrial & Commercial Powder Coating Services
Sandblasting, preparation, coating and curing all happen in-house at our San Diego facility, so large parts and production work stay on one schedule under one roof.
Industrial Powder Coating
Fabricated assemblies, structural steel and equipment components coated to your specifications and cured in our 20' × 10' × 10' oven.
Commercial Powder Coating
Railings, gates, fencing, signage and site furnishings for contractors, property managers and public agencies.
Production & High Volume
Repeat orders and scheduled batches for manufacturers and fabricators, racked and run for consistent results part after part.
Large Part Powder Coating
Beams, frames and oversized fabrications up to 20 ft long, blasted, coated and cured in one piece.
Sandblasting & Surface Prep
Our in-house 20' × 10' × 10' blast booth takes rust, mill scale and old coatings down to clean metal.
Pickup & Delivery
Our truck picks up and delivers commercial projects, large parts and production orders across San Diego County.
Built for Large Parts
Our 20' × 10' × 10' industrial curing oven and matching 20' × 10' × 10' sandblast booth sit side by side in our 8,500 sq. ft. San Diego facility. Oversized fabrications are blasted, coated and cured in one piece, with no cutting parts down and no second shop.
· Structural beams & frames
· Gates, railings & fencing runs
· Trailer & equipment frames
· Large fabricated assemblies
· Racked production batches
· Architectural panels
Industries We Serve
Manufacturers, fabricators, contractors and public agencies across San Diego County send us the parts that have to hold up in service.
Aerospace & Defense
Manufacturing
Metal Fabrication
Architectural & Construction
Marine & Coastal
Government & Municipal
Commercial Property
Hospitality & Outdoor Furniture
Technology & Electronics
Automotive & Performance
Featured Projects
Commercial and industrial work from across San Diego, from hospital site furnishings and stadium signage to production runs for local manufacturers.
Before
After
Featured Case Study
Rady Children's Hospital
Outdoor seating at Rady Children's Hospital came to us weathered and worn. We handled the whole job in-house, from pickup and disassembly through sandblasting, primer and powder coat, then reassembled the sets and delivered them back ready to use.
Our Process
Every project follows the same proven sequence, from the first review of your drawings to final inspection and delivery.
01
Quote & Review
Drawings, dimensions, quantities and finish requirements reviewed before we price.
02
Pickup / Drop-off
Bring parts to our shop or schedule our truck to pick them up.
03
Sandblast
Rust, scale and old coatings removed in our 20' × 10' × 10' blast booth.
04
Prep
Surfaces cleaned and detailed so the coating bonds properly.
05
Mask & Plug
Threads, bores and mating surfaces protected before coating.
06
Primer
Primer applied where the part and its environment call for it.
07
Powder Coat
Powder applied electrostatically for even, full coverage.
08
Cure
Parts cured in our 20' × 10' × 10' industrial oven.
09
QC
Coverage, finish and masked areas inspected before release.
10
Delivery
Packaged for pickup or delivered back to your site.
Quality at Every Stage
Quality control is built into every step, not saved for the end. Parts are checked after blasting, before coating and again after cure, so problems are caught and corrected before anything leaves our shop.
· Finish appearance & coverage
· Color & finish verification
· Masked areas checked
· Visible defects corrected
· Final workmanship review
· Careful packaging
Wheels, Automotive & Specialty Powder Coating
We still take care of enthusiasts and homeowners. Wheels and rims, calipers, motorcycle and bike frames, patio furniture and one-off specialty parts get the same preparation and finish as our commercial work, and same-day rim service is available.
· Wheel & rim powder coating
· Same-day rim service
· Automotive & motorcycle parts
· Patio & outdoor furniture
What Our Customers Say
★★★★★
Couldn't be happier with the high quality of my newly powder-coated rims and the professional service I received from Anocote Powder! Dropped off my car at 8am and picked it up at 3:15pm the same day.
Stefan Lemperle
Google Review
★★★★★
Anocote Powder is a one stop shop. Kent and his team provide superior work and top notch customer service. They completed my rims in just one day. Their work is absolutely flawless.
Bianca Kapustka
Google Review
★★★★★
These guys are the real deal. Super fast, good quality, easy to work with, and fair prices. They had my job done in 2 days!
Greg Brice
Google Review
An Established San Diego Powder Coating Facility
Anocote Powder has been coating metal in San Diego for more than 12 years and completes over 1,000 jobs a year. Sandblasting, preparation, coating, curing and inspection all happen in-house at our 8,500 sq. ft. facility on Production Avenue, so your project stays under one roof from start to finish.
· 8,500 sq. ft. facility
· 12+ years in business
· 1,000+ jobs annually
· Everything handled in-house
· Pickup & delivery available
· Mon – Fri 7am – 3:30pm
Get a Free Quote Today
Call or text (858) 547-5970, or send us your project details and we'll get back to you fast.